.
A lighter, stronger alternative to wood pallets — engineered for push-pull operations across North America.
Overview
Paperboard slip sheets are thin, rigid sheets of solid fiberboard used in place of wooden pallets to unitize, store, and transport palletized loads. They are slid into position by a push-pull attachment or clamp truck — no pallet required.
Compared to wood pallets, slip sheets dramatically reduce cost, weight, and storage space while meeting the same unitizing requirements. They are widely used in food, beverage, automotive, and industrial applications across North America.
Why Choose Slip Sheets
Slip sheets cost a fraction of wooden pallets — with no repair, replacement, or pallet management program required. Reduce costs by up to 40% versus wood.
Weigh as little as 1–2 lbs versus 40+ lbs for a wood pallet. Pack up to 7 times more units per truckload and reduce freight costs significantly.
Slip sheets stack flat and take up minimal storage space. A stack of 100 sheets occupies just a few inches versus a cumbersome stack of wood pallets.
Unlike wood pallets, paperboard slip sheets are not subject to ISPM 15 phytosanitary requirements. Save time and money on every international shipment.
Clean, splinter-free surface meets food-grade and pharmaceutical storage requirements. No harboring of insects, mold, or bacteria like wood pallets can.
Made from recycled fibers and fully recyclable at end of life. Reduce your environmental footprint without compromising on performance or strength.
| Attribute | Paperboard Slip Sheet | Wood Pallet |
|---|---|---|
| Weight | 1–2 lbs | 40–70 lbs |
| Cost per unit | Low — fraction of wood | $8–$25+ each |
| Storage space | Stacks flat, minimal footprint | Bulky, requires significant space |
| Freight density | Up to 7× more units per truck | Limited — heavy & thick |
| Export compliance | No ISPM 15 fumigation needed | Must be heat-treated or fumigated |
| Contamination risk | None — clean smooth surface | Risk of splinters, nails, mold |
| Recyclability | 100% recyclable | Limited — often landfilled |
| Pallet management | Single-use, no return required | Requires retrieval & tracking |
Product Range
InterBULK carries a full range of solid fiberboard slip sheets to match your load weight, surface requirements, and budget.
Lightest option for lighter unit loads. Consistent smooth surface for push-pull operations at minimal cost per unit.
Most popular for standard pallet loads. Combines rigidity and tear resistance for reliable push-pull performance.
Maximum strength for heavy industrial loads. Triple-laminated construction for superior stiffness and puncture resistance.
Clay-coated or PE surface for moisture resistance. Ideal for refrigerated, cold-chain, or humid warehouse environments.
Surface-treated with anti-slip coating or embossed texture. Prevents load shifting during transport and stacking.
Standard sizes 36″ × 36″ up to 60″ × 60″ and beyond. Custom sizes, ply counts, and surface treatments made to order.
Freight Efficiency
A standard 53-foot trailer can carry approximately 26 standard wood pallets — or the equivalent of 182+ pallet loads of slip-sheeted product. That is a fundamental shift in your freight economics.
Because each slip sheet weighs only 1–2 lbs versus 40–70 lbs for a wood pallet, you not only fit more loads — you also stay well under weight limits, reducing dimensional weight charges and fuel surcharges.
26
Wood pallet loads
per 53′ trailer
182+
Slip-sheeted loads
per 53′ trailer
Specification
Paperboard thickness is measured in thousandths of an inch (points or mils) using a precision caliper. The thickness you need depends on your load weight and the number of plies specified.
All InterBULK slip sheets are measured and certified to specification before shipment. Our quality control team verifies every production lot against stated caliper tolerances.
| Thickness (inches) | Caliper (pt) | Typical Application |
|---|---|---|
| 0.059″ | 59 pt | Light loads, 1-ply |
| 0.080″ | 80 pt | Standard 1-ply |
| 0.110″ | 110 pt | Standard 2-ply |
| 0.160″ | 160 pt | Heavy-duty 2-ply |
| 0.200″ | 200 pt | Heavy 3-ply industrial |
Our Certifications
Our manufacturing partners are certified across food safety, environmental, and quality standards. The full list includes BRC, GFSI, FDA, CFIA, Halal, Kosher, ISO, IMO, and UN certifications.
Why InterBULK
InterBULK supplies paperboard slip sheets to distribution centers, manufacturers, and logistics providers across the USA and Canada.
Inventory at strategically located distribution points across both countries for fast delivery to virtually any location in North America.
Every product ships with complete spec sheets — caliper thickness, ply count, surface type, load capacity, and size. No guesswork when ordering.
Work directly with our team — not a call center. We help you spec the right product, optimize quantities, and resolve any issues fast.
Direct import relationships and high-volume purchasing allow us to pass genuine savings to customers — on single orders or ongoing supply agreements.
All slip sheets are produced to TAPPI/ASTM standards. Every production lot is measured and inspected before shipment to specification.
Need a non-standard size, special coating, or custom ply count? We work with manufacturing partners to produce exactly what you require.